Virtual Machine is a software enable you to create a virtual operating system in windows.
For those who can't boot the Back Track Software properly, due to their display card not supported.
Virtual Machine is an alternative way.
Step to install the virtual machine.
1. Please follow below picture by follow the numbering and text in red color.
- First install the virtual machine software (
).
- You can download virtual machine from: http://comfortsurf.com/Download2.aspx?id=32
- Open the Virtual Machine software and Select Installer disc, choose the CD rom (as number 2).
- If you do not have CD Rom, you can use ultra iso software to make a iso image (at another computer) and copy to your harddisk.
and tick "choose installer disc image file" and browse "that iso".
2. Once click finish, VMware will start loading... Click ok when ask below.
3. Click ok again when below message prompt out.
4. You need to make sure you usb wifi adapter is using by VMware, not the windows.
Go to VM --> Removable Devices --> Realtek RT8187xxxxx --> Select Connect.
Now only means that your VMware is using the wifi adapter.
5. When prompt below, click ok.
6. Now you already in Linux OS, same as in the manual. Now follow the manual on how the crack the password.
** Remember, To release your mouse from the VMware, please press CTRL + ALT.
Feeding Bottle Method:
1. After boot successful, you will be bring to below screen. Click the "Feeding Bottle" to start the program.
A windows will prompt out, just click ok.
2. At below screen, select the wifi card and wait for the monitoring mode enabled. Then click next..
3. Click scan and wait for 30second. Then select the wifi that have client as shown in below.
Click and highlight the client info and click next.
4. Click start to attack, you will notice the IVS start running.. Once it reach 30000 to 50000, the password should be found. Refer below picture.
Note: the router that you want to hack must be using (have data transfer), the higher data transfer, the faster the cracking process.
If you notice that IVS value is not running, or running very very slow after few minutes, it means that there is no data transfer on the router. You may look for other time (when the router is using) to test
again.
5. Below shown successful case with password shown. Copy down the password and close the software. Then logout and shutdown the machine.
Minidwep-gtk Method:
1. After boot successful, you will be bring to below screen. Click the Minidwep-gtk to start the program.
A windows will prompt out, just click ok.
2. When below windows prompt out, just click ok.
3. Click the Minipwep-gtk to start the program. Then click scan to scan the available wireless.
4. Select the wireless with client, and click the launch to start cracking process.
Note: the router that you want to hack must be using (have data transfer), the higher data transfer, the faster the cracking process.
If you notice that IVS value is not running, or running very very slow after few minutes, it means that there is no data transfer on the router. You may look for other time (when the router is using) to test again.
5. Below showing the IVS is running and increasing... Normally IVS Reach value around 30000 to 50000, the password will be found.
6. Below shown successful case with password shown. Copy down the password and close the software. Then logout and shutdown the machine.
For WPA/WPA2:
1. Just select WPA/WPA2 and click scan.
2. Select the wifi that have client and click the dictionary attack to browse to your dictionary password list.
3. Click lauch to attack. If password still not found after the run out the dictionary list, you have to prepare a bigger dictionary list.
*** This Beini Software is for your own wifi education purpose for you to understand more on yoru OWN wifi security.
Cracking other people wifi is illegal and against law.
We advice you do not attempt to attack other ppl wireless other than your own.
Andy Suria/DeeKelantan Area
014 8464852, 013 9208041
irbresources2@gmail.com
GOOD LUCK TO YOU.
THANKS.
